- Single Row Radial Bearing, 0.625" ID x 1.375" OD x 0.281" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| O.D. Type | Straight |
| Lubricant | Oil Preservative |
| Precision | Standard |
| No. in Set | Single Bearing |
| Pre Lubricant | None |
| Locking Device | No Locking Device |
| Material | Steel |
| Cage Type | Metal |
| Enclosure | Open |
| Ball Material | Steel |
| Radial Internal Clearance | C3 |
| Seal Type | Unsealed |
| Origin | Single Row Radial |
| Dynamic Load Rating | 1,700.00 lbf |
| Open Width | 9/32 in |
| Preload Level | None |
| Capacity | Standard Capacity |
| Width | 9/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. | 1 3/8 in |
| Bore Type | Round Bore |
| Seal Material | None |
| Fillet Radius | 0.031 in |
| Closed Width | 11/32 in |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Outer Ring Width | 9/32 in |
| Rows of Balls | Single |
| Cage Material | Steel |
| icNumber | 7697622 |
| Static Load Rating [Max] | 682.00 lbf |
| I.D. | 5/8 in |
| Inch/Metric | Inch Bore |
| Inner Ring Width | 0.281 in |
| Weight | 0.088 LB |
| EAN or UPC | 87796044715 |
| NSN Number | 3110-00-554-3341 |

