Find a Service Center
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Inch/Metric | Inch Bore |
| Rows of Balls | Single |
| Seal Material | Buna-N |
| Ball Material | Steel |
| O.D. Type | Straight |
| Fillet Radius | 0.031 in |
| icNumber | 7697085 |
| Enclosure | Double Sealed |
| Temperature Range [Max] | 275 °F |
| Inner Ring Width | 7/16 in |
| Static Load Rating [Max] | 1,000.00 lbf |
| Material | Steel |
| Preload Level | None |
| Outer Ring Width | 7/16 in |
| Closed Width | 7/16 in |
| Origin | Single Row Radial |
| Bearing Type | Radial |
| Cage Material | Steel |
| Seal Type | Contact Seals |
| Snap Ring | No Snap Ring |
| Open Width | 0.312 in |
| Dynamic Load Rating | 2,320.00 lbf |
| Temperature Range [Min] | -30 °F |
| No. in Set | Single Bearing |
| I.D. | 3/4 in |
| Width | 7/16 in |
| Precision Level | Standard (ABEC 1) |
| O.D. | 1 5/8 in |
| Lubricant | Polyurea Base |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Locking Device | No Locking Device |
| Precision | Standard |
| Capacity | Standard Capacity |
| Contact Angle | 0° |
| Cage Type | Metal |
| Radial Internal Clearance | C3 |
| Bore Type | Round Bore |
| Weight | 0.132 LB |
| EAN or UPC | 87796044784 |
| NSN Number | 3110-00-759-3968 |
