Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Seal Material | Metal |
| Seal Type | Non-Contact Seals |
| Temperature Range [Min] | -30 °F |
| Bore Type | Round Bore |
| icNumber | 7696983 |
| Precision Level | Standard (ABEC 1) |
| Width | 1/2 in |
| Locking Device | No Locking Device |
| Snap Ring | No Snap Ring |
| Fillet Radius | 0.031 in |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 2,500.00 lbf |
| Static Load Rating [Max] | 1,120.00 lbf |
| O.D. | 1 7/8 in |
| Preload Level | None |
| Bearing Type | Radial |
| Open Width | 3/8 in |
| Material | Steel |
| Outer Ring Width | 1/2 in |
| Inner Ring Width | 1/2 in |
| Origin | Single Row Radial |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Temperature Range [Max] | 275 °F |
| Ball Material | Steel |
| I.D. | 7/8 in |
| Contact Angle | 0° |
| Cage Material | Steel |
| Precision | Standard |
| Inch/Metric | Inch Bore |
| Closed Width | 1/2 in |
| Enclosure | Double Shielded |
| O.D. Type | Straight |
| No. in Set | Single Bearing |
| Lubricant | Polyurea Base |
| Cage Type | Metal |
| Radial Internal Clearance | C3 |
| Weight | 0.29 LB |
| EAN or UPC | 87796044807 |
| NSN Number | 3110-00-155-8883 |
