- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.500" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Material | Steel |
| Static Load Rating [Max] | 1,120.00 lbf |
| Temperature Range [Max] | 275 °F |
| Fillet Radius | 0.031 in |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Outer Ring Width | 1/2 in |
| Radial Internal Clearance | C3 |
| Preload Level | None |
| Dynamic Load Rating | 2,500.00 lbf |
| Origin | Single Row Radial |
| O.D. Type | Straight |
| Closed Width | 1/2 in |
| Open Width | 3/8 in |
| Contact Angle | 0° |
| Temperature Range [Min] | -30 °F |
| Width | 1/2 in |
| Inch/Metric | Inch Bore |
| O.D. | 1 7/8 in |
| Bore Type | Round Bore |
| I.D. | 7/8 in |
| Capacity | Standard Capacity |
| Seal Material | Buna-N |
| Lubricant | Polyurea Base |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| Seal Type | Contact Seals |
| Precision | Standard |
| Cage Type | Metal |
| Enclosure | Double Sealed |
| Snap Ring | No Snap Ring |
| Locking Device | No Locking Device |
| icNumber | 7698129 |
| Inner Ring Width | 1/2 in |
| Rows of Balls | Single |
| Cage Material | Steel |
| Weight | 0.29 LB |
| EAN or UPC | 87796074729 |

