Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.500" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Precision | Standard |
| Static Load Rating [Max] | 1,120.00 lbf |
| Temperature Range [Min] | -30 °F |
| Cage Type | Metal |
| Dynamic Load Rating | 2,500.00 lbf |
| Closed Width | 1/2 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Inch Bore |
| Radial Internal Clearance | C3 |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Outer Ring Width | 1/2 in |
| Rows of Balls | Single |
| O.D. Type | Straight |
| I.D. | 7/8 in |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Bearing Type | Radial |
| Lubricant | Polyurea Base |
| Bore Type | Round Bore |
| Fillet Radius | 0.031 in |
| Ball Material | Steel |
| icNumber | 7698129 |
| Seal Type | Contact Seals |
| Material | Steel |
| Cage Material | Steel |
| Seal Material | Buna-N |
| Width | 1/2 in |
| Origin | Single Row Radial |
| Enclosure | Double Sealed |
| Preload Level | None |
| O.D. | 1 7/8 in |
| Temperature Range [Max] | 275 °F |
| Capacity | Standard Capacity |
| Open Width | 3/8 in |
| Inner Ring Width | 1/2 in |
| Weight | 0.29 LB |
| EAN or UPC | 87796074729 |
