Find a Service Center
- 1.1875" Shaft, 2.375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir SAOL type heavy series pillow blocks are designed for applications where higher-than-usual temperature applications where for any reason one or more floating bearing units required. The floating unit allows its bearing to move axially as the shaft expands because of the temperature rise, while the fixed unit maintains shaft location. Bearings also have loose internal fit. The SAOL unit is equipped with a heavy series, self-aligning SMN wide inner ring bearing and self-locking collar. An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type). By removing the spacer ring, the assembly becomes a floating unit.
applications
- Conveyors
- Agriculture
- Fans and blowers
- Food processing
| Shaft Dia. | 1.1875 in |
| Bearing Type | Ball Bearing |
| Series | SAOL Series |
| Pillow Block Type | Thru-Bolt |
| Base Width | 2 3/8 in |
| Bearing Insert | SMN103KS |
| Mounted Unit Duty | Heavy-Duty |
| Housing Material | Cast Iron |
| Length Through Bore | 4.0625 in |
| Bolt Hole Width | 5/8 in |
| Base Height | 11/16 in |
| Bolt Size | 1/2 in |
| Locking Device | Eccentric Locking Collar |
| Seal Type | Contact Seals |
| Housing Width | 3 5/8 in |
| Bolt Holes | 2 |
| End Type | Open End |
| Inch/Metric | Inch |
| Bolt Hole Length | 7/8 in |
| Housing Construction | 1 Piece |
| Insert Type | Steel Insert |
| Bearing Design | Expansion/Non-Expansion |
| Bolt Hole Spacing | 6 5/8 in |
| Base Length | 8 1/4 in |
| Lubrication | Relubricatable |
| Overall Width | 4 1/16 in |
| Weight | 12.19 LB |
| EAN or UPC | 87796058170 |
