- 1.4375" Shaft, 1.875" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Height | 3 11/16 in |
| Mounted Unit Duty | Normal-Duty |
| Locking Device | Setscrew Locking Collar |
| Bolt Hole Spacing Range [Min] | 3 1/4 in |
| Base Height | N/A |
| End Type | Open End |
| Housing Material | Cast Iron |
| Bolt Hole Spacing | 3 1/4 in |
| Bearing Design | Non-Expansion |
| Series | STB Series |
| Housing Construction | 1 Piece |
| Bolt Size | 1/2-13 |
| Bearing Insert | GYA107RRB3 |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Bolt Hole Spacing Range [Max] | 3 1/4 in |
| Insert Type | Steel Insert |
| Bolt Hole Length | N/A |
| Seal Type | Contact Seals |
| Overall Width | 1 57/64 in |
| Shaft Dia. | 1.4375 in |
| Base Length | 4 1/4 in |
| Base Width | 1 57/64 in |
| Inch/Metric | Inch |
| Pillow Block Type | Tapped Base |
| Bearing Type | Ball Bearing |
| Weight | 3.346 LB |
| EAN or UPC | 87796180000 |

