Find a Service Center
- Single Row Radial Bearing, 1.251" Hex ID x 3.14961" OD x 1 7/16" Wide, Double Sealed (Tri-Ply), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
- Ag Duty
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Bore Type | Hex Bore |
| Lubricant | Polyurea Base |
| O.D. Type | Spherical |
| Cage Material | Steel |
| Snap Ring | No Snap Ring |
| Material | Steel |
| Seal Type | Tri-Ply Shroud Seals |
| No. in Set | Single Bearing |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Dynamic Load Rating | 8130 lbf |
| Contact Angle | 0° |
| Inch/Metric | Inch Bore |
| Locking Device | No Locking Device |
| Radial Internal Clearance | C3 |
| I.D. | 1 1/4 in |
| Temperature Range [Max] | 275 °F |
| Seal Material | Buna-N |
| Static Load Rating [Max] | 4460 lbf |
| Capacity | Standard Capacity |
| Bearing Type | Radial |
| Cage Type | Metal |
| Origin | Single Row Radial |
| Ball Material | Steel |
| O.D. | 3.14961 in |
| Enclosure | Double Sealed |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Outer Ring Width | 18 mm |
| Temperature Range [Min] | -30 °F |
| Precision | Standard |
| Rows of Balls | Single |
| Inner Ring Width | 1 7/16 in |
| Weight | 1.57 LB |
| EAN or UPC | 87796041387 |
