Find a Service Center
- Single Row Radial Bearing, 1.251" Hex ID x 3.14961" OD x 1 7/16" Wide, Double Sealed (Tri-Ply), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
- Ag Duty
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Outer Ring Width | 18 mm |
| Snap Ring | No Snap Ring |
| Static Load Rating [Max] | 4460 lbf |
| Locking Device | No Locking Device |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| No. in Set | Single Bearing |
| O.D. | 3.14961 in |
| Inch/Metric | Inch Bore |
| Cage Material | Steel |
| Material | Steel |
| Bore Type | Hex Bore |
| Temperature Range [Min] | -30 °F |
| Precision | Standard |
| Seal Material | Buna-N |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inner Ring Width | 1 7/16 in |
| Ball Material | Steel |
| Enclosure | Double Sealed |
| Contact Angle | 0° |
| Origin | Single Row Radial |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 8130 lbf |
| Cage Type | Metal |
| Preload Level | None |
| I.D. | 1 1/4 in |
| Precision Level | Standard (ABEC 1) |
| O.D. Type | Spherical |
| Temperature Range [Max] | 275 °F |
| Seal Type | Tri-Ply Shroud Seals |
| Lubricant | Polyurea Base |
| Rows of Balls | Single |
| Weight | 1.57 LB |
| EAN or UPC | 87796041387 |
