Find a Service Center
Alternate Products
- 70 mm Shaft, 76.2 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Mounted Unit Duty | Normal-Duty |
| Housing Construction | 1 Piece |
| Housing Height | 154 mm |
| Inch/Metric | Metric |
| Series | YAK Series |
| Base Height | 33.3 mm |
| Bolt Hole Spacing | 203.2 mm |
| Bearing Insert | GYE70KRRB |
| Bolt Hole Spacing Range [Max] | 238.1000 mm |
| Insert Type | Steel Insert |
| Bearing Type | Ball Bearing |
| End Type | Open End |
| Lubrication | Relubricatable |
| Collar O.D. | 86.92 mm |
| Seal Type | Contact Seals |
| Housing Material | Cast Iron |
| Length Through Bore | 69.9 mm |
| Overall Width | 79.4 mm |
| Bearing Design | Non-Expansion |
| Base Length | 266.7 mm |
| Bolt Hole Spacing Range [Min] | 168.3 |
| Locking Device | Setscrew Locking Collar |
| Bolt Holes | 2 |
| Pillow Block Type | Thru-Bolt |
| Base Width | 73 mm |
| Shaft Dia. | 70 mm |
| Bolt Size | M20 |
| Weight | 15.934 LB |
| EAN or UPC | 87796169975 |
