Find a Service Center
Alternate Products
- 70 mm Shaft, 76.2 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Locking Device | Setscrew Locking Collar |
| Lubrication | Relubricatable |
| Base Length | 266.7 mm |
| Seal Type | Contact Seals |
| Inch/Metric | Metric |
| Bearing Design | Non-Expansion |
| Bolt Size | M20 |
| Collar O.D. | 86.92 mm |
| Base Width | 73 mm |
| Base Height | 33.3 mm |
| Bearing Insert | GYE70KRRB |
| Bearing Type | Ball Bearing |
| End Type | Open End |
| Bolt Hole Spacing Range [Min] | 168.3 |
| Series | YAK Series |
| Insert Type | Steel Insert |
| Bolt Hole Spacing Range [Max] | 238.1000 mm |
| Mounted Unit Duty | Normal-Duty |
| Pillow Block Type | Thru-Bolt |
| Length Through Bore | 69.9 mm |
| Overall Width | 79.4 mm |
| Bolt Hole Spacing | 203.2 mm |
| Shaft Dia. | 70 mm |
| Bolt Holes | 2 |
| Housing Height | 154 mm |
| Weight | 15.934 LB |
| EAN or UPC | 87796169975 |
