Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Bolt Circle Dia. | 4.187 in |
| Port Type | SAE O-Ring |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Motor Type | Spool Valve |
| Rotation | Reverse Rotation |
| Mount Type | 2 Bolt |
| RPM [Max] | 969 rpm |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Flange Orientation | Standard |
| Series | H Series |
| Flow [Max] | 12 gal/min |
| Port Code | A |
| Mounting Type Code | A |
| Case Drain Code | 1 |
| Paint Code | A |
| Special Features Hardware Code | 00 |
| Material | Cast Iron |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Port Size & Location | SAE-10 Side |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Mounting Hole Size | 0.565 in |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Special Features Assembly Code | 1 |
| Output Shaft Code | 01 |
| Pressure [Max] | 1800 psi |
| Corrosion Resistant | No |
| Special Features | None |
| Displacement (in³/rev) | 2.81 |
| Motor Element | Gerotor |
| Flow Rate | 11.25 gal/min |
| Splines | 0 |
| Duty | Standard-Duty |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Port Location | Side Port |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Mounting Holes | 0.535 in |
| Weight | 13.0 LB |
