Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- M8 X 1.25-6H Manifold Port
- 4.52 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Seal Material | Buna-N |
| Rotation | Standard Rotation |
| Output Shaft Code | 24 |
| Shaft Size & Type | Straight |
| Displacement (in³/rev) | 4.52 |
| Paint Code | A |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| RPM [Min] | 760 rpm |
| Series | H Series |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Port Size | Manifold, M8 x 1.25 Threads, M8 X 1.25-6H |
| Port Code | D |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Special Features Assembly Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 14 gal/min |
| Duty | Standard-Duty |
| Shaft Type | Straight |
| Mounting Hole Size | 0.565 in |
| Splines | 0 |
| Port Location | Side Port |
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Mounting Type Code | A |
| Pressure [Max] | 1800 psi |
| Port Type | Manifold |
| Special Features Hardware Code | 00 |
| Bolt Circle Dia. | 4.187 in |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Corrosion Resistant | No |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Holes | 0.535 in |
| Motor Type | Spool Valve |
| Case Drain Code | 2 |
| RPM [Max] | 760 rpm |
| Pilot Diameter | 3.25 in |
| Weight | 13.0 LB |
