Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 3.54 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 14 gal/min |
| Splines | 0 |
| Series | H Series |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Element | Gerotor |
| Geroter/Geroler Options | Free Running |
| Seal Material | Buna-N |
| Port Code | C |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| RPM [Max] | 953 rpm |
| Pressure [Max] | 1800 psi |
| RPM [Min] | 953 rpm |
| Special Features Hardware Code | AA |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Paint Code | A |
| Output Shaft Code | 01 |
| Mounting Holes | 0.535 in |
| Port Location | Side Port |
| Corrosion Resistant | No |
| Motor Type | Spool Valve |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Output Torque at Rated PSI (inch/pounds) | 805 in lb |
| Special Features | Free Running Gerotor |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 3.54 |
| Case Drain | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 4.187 in |
| Special Features Assembly Code | 0 |
| Duty | Standard-Duty |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.565 in |
| Port Type | Manifold |
| Rotation | Standard Rotation |
| Weight | 11.5 LB |
