Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 7.32 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Location | Side Port |
| Output Shaft Code | 01 |
| Port Code | E |
| RPM [Max] | 469 rpm |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Case Drain | G 1/4 (BSP) |
| Special Features | None |
| RPM [Min] | 469 rpm |
| Special Features Hardware Code | 00 |
| Flow Rate | 57 lpm |
| Displacement (in³/rev) | 7.32 |
| Flow [Max] | 15 gal/min |
| Pilot Diameter | 3.25 in |
| Pressure [Max] | 1800 psi |
| Series | H Series |
| Corrosion Resistant | No |
| Case Drain Code | 2 |
| Mounting Type Code | A |
| Mount Type | 2 Bolt |
| Flange Orientation | Standard |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Material | Cast Iron |
| Mounting Hole Size | 0.565 in |
| Motor Type | Spool Valve |
| Bolt Circle Dia. | 4.187 in |
| Rotation | Standard Rotation |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size | 1/2 |
| Inlet Pressure [Max] | 2500 psi |
| Motor Element | Gerotor |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Port Type | BSPP |
| Splines | 0 |
| Weight | 13.0 LB |
