Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Port Code | A |
| Port Size | SAE-10, 7/8-14 UNF |
| Seal Material | Buna-N |
| Mount Type | 2 Bolt |
| Pressure [Max] | 1800 psi |
| Port Location | Side Port |
| RPM [Max] | 1021 rpm |
| Paint Code | A |
| Flow [Max] | 10 gal/min |
| Splines | 6 |
| Flow Rate | 10 gal/min |
| Duty | Standard-Duty |
| Port Type | SAE O-Ring |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Special Features | Free Running Gerotor |
| Mounting Hole Size | 0.535 in |
| Shaft Type | Splined |
| Flange Orientation | Standard |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Special Features Hardware Code | AA |
| Case Drain Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 02 |
| Series | H Series |
| Bolt Circle Dia. | 4.19 in |
| Displacement (in³/rev) | 2.2 |
| RPM [Min] | 1021 rpm |
| Shaft Size & Type | 1 in - 6T Spline |
| Port Size & Location | SAE-10 Side |
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Geroter/Geroler Options | Free Running |
| Case Drain | None |
| Motor Element | Gerotor |
| Corrosion Resistant | No |
| Mounting Holes | 0.535 in |
| Mounting Type Code | A |
| Weight | 11.2 LB |
