Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 9.7 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Motor Type | Spool Valve |
| Output Shaft Code | 07 |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| RPM [Min] | 353 rpm |
| Port Code | A |
| Flow Rate | 15 gal/min |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 15 gal/min |
| Corrosion Resistant | No |
| Pilot Diameter | 1.75 in |
| Mount Type | 4 Bolt |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Flange Orientation | Standard |
| Mounting Type Code | B |
| Series | H Series |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | SAE-10, 7/8-14 UNF |
| Port Type | SAE O-Ring |
| Material | Cast Iron |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features | None |
| Pressure [Max] | 1650 psi |
| Case Drain Code | 0 |
| Port Location | Side Port |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Displacement (in³/rev) | 9.7 |
| Mounting Hole Size | 3/8 in |
| Shaft Size & Type | Straight |
| Shaft Type | Straight w/ Cross Hole |
| Splines | 0 |
| RPM [Max] | 353 rpm |
| Weight | 12.5 LB |
