Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 4.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Shaft Type | Straight w/ Woodruff Key |
| Output Shaft Code | 01 |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 2 |
| Series | H Series |
| Corrosion Resistant | No |
| Port Size & Location | SAE-10 Side |
| Motor Element | Gerotor |
| Motor Type | Spool Valve |
| Mounting Hole Size | 0.535 in |
| RPM [Max] | 760 rpm |
| Port Location | Side Port |
| Case Drain | None |
| Flow [Max] | 15 gal/min |
| Mount Type | 2 Bolt |
| Port Size | SAE-10, 7/8-14 UNF |
| Special Features | Flange Rotated 90° |
| Splines | 0 |
| Case Drain Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Mounting Type Code | A |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Flow Rate | 15 gal/min |
| Pressure [Max] | 1800 psi |
| Port Code | A |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Mounting Holes | 0.535 in |
| Paint Code | A |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 4.5 |
| Special Features Hardware Code | 00 |
| Bolt Circle Dia. | 4.19 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Type | SAE O-Ring |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| RPM [Min] | 760 rpm |
| Flange Orientation | Flange Rotated 90° |
| Weight | 13.0 LB |
