Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain Code | 0 |
| Flow [Max] | 10 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Pilot Diameter | 3.25 in |
| Motor Element | Gerotor |
| Port Code | A |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Port Type | SAE O-Ring |
| RPM [Min] | 1021 rpm |
| Series | H Series |
| Special Features | Free Running Gerotor |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 2.2 |
| Bolt Circle Dia. | 4.187 in |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mounting Hole Size | 0.565 in |
| Special Features Hardware Code | AA |
| Shaft Type | Straight |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Material | Cast Iron |
| Case Drain | None |
| Shaft Size & Type | Straight |
| Port Location | Side Port |
| RPM [Max] | 1021 rpm |
| Splines | 0 |
| Rotation | Standard Rotation |
| Flange Orientation | Standard |
| Pressure [Max] | 1800 psi |
| Mount Type | 2 Bolt |
| Port Size & Location | SAE-10 Side |
| Geroter/Geroler Options | Free Running |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Mounting Type Code | A |
| Motor Type | Spool Valve |
| Flow Rate | 9.5 gal/min |
| Seal Material | Buna-N |
| Paint Code | A |
| Corrosion Resistant | No |
| Output Shaft Code | 24 |
| Inlet Pressure [Max] | 2500 psi |
| Weight | 13.0 LB |
