Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 3/4-16 UNF-2B SAE O-Ring Port
- 17.94 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Type Code | A |
| Port Code | G |
| Port Type | SAE O-Ring |
| Motor Element | Gerotor |
| Seal Material | Buna-N |
| Duty | Standard-Duty |
| Output Torque at Rated PSI (inch/pounds) | 3107 in lb |
| Special Features Hardware Code | 00 |
| Series | H Series |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Paint Code | A |
| Port Size | SAE-8, 3/4-16 UNF-2B |
| Corrosion Resistant | No |
| Pressure [Max] | 1350 psi |
| Bolt Circle Dia. | 4.187 in |
| Special Features | None |
| Pilot Diameter | 3.25 in |
| Case Drain Code | 0 |
| Maximum Speed @ Continuous Flow | 192 rpm @ 15 gal/min |
| Case Drain | None |
| Material | Cast Iron |
| Mount Type | 2 Bolt |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 17.94 |
| Mounting Holes | 0.535 in |
| Mounting Hole Size | 0.565 in |
| Motor Type | Spool Valve |
| RPM [Min] | 192 rpm |
| Port Location | End Port |
| Splines | 0 |
| Flow Rate | 14 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| Flange Orientation | Standard |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Max] | 192 rpm |
| Weight | 13.0 LB |
