Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | REF! |
| Port Size & Location | SAE-10 Side |
| Paint Code | A |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Mount Type | 2 Bolt |
| RPM [Max] | 963 rpm |
| Pressure [Max] | 2000 psi |
| Inlet Pressure [Max] | 2500 psi |
| Port Type | SAE O-Ring |
| Port Location | Side Port |
| Displacement (in³/rev) | 3.5 |
| Special Features Hardware Code | 00 |
| Special Features Assembly Code | 0 |
| Series | S Series |
| Mounting Holes | 0.535 in |
| Motor Type | Spool Valve |
| Duty | Standard-Duty |
| Special Features | None |
| Motor Element | Gerotor |
| Pilot Diameter | 3.25 in |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Rotation | Standard Rotation |
| Output Torque at Rated PSI (inch/pounds) | 1021 in lb |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size | SAE-10, 7/8-14 UNF |
| Seal Material | Buna-N |
| Mounting Hole Size | 0.535 in |
| Case Drain Code | 1 |
| RPM [Min] | 963 rpm |
| Output Shaft Code | 01 |
| Bolt Circle Dia. | 4.19 in |
| Flow Rate | 15 gal/min |
| Splines | 0 |
| Port Code | A |
| Maximum Speed @ Continuous Flow | 963 rpm @ 15 gal/min |
| Weight | 29.0 LB |
