Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 2" Shaft
- 2 3/4" Centerline to Base
- 10 5/8" Base Length
- 8 7/16" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Haulage
- Winders
- Paper manufacturing
- Headgear
- Marine
- Electrical machinery
- Fans
- Conveyors
- Mechanical handling
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base Length | 10 5/8 in |
| Bolt Hole Spacing Range [Max] | 8 7/8 in |
| Seal Type | Triple Labyrinth Seals |
| Bolt Size | 5/8 in |
| Base Width | 2 3/8 in |
| Inch/Metric | Inch |
| RPM [Max] | 4630 rpm |
| Lubrication | Relubricatable |
| Bolt Hole Spacing Range [Min] | 8 in |
| Locking Device | Clamping Ring Collar |
| Housing Height | 6 1/4 in |
| End Type | Open End |
| Pedestal | P 02 |
| Pillow Block Type | Thru-Bolt |
| Bearing Type | Split Cylindrical |
| Series | 01 Series |
| Base Height | 1 in |
| Bearing Design | Expansion |
| Housing Material | Cast Iron |
| Temperature Range [Max] | 212 °F |
| Bolt Hole Spacing | 8 7/16 in |
| Dynamic Load Rating | 16800 lbf |
| Static Load Rating [Max] | 18000 lbf |
| Shaft Dia. | 2 in |
| Housing Construction | 2 Piece |
| Axial Load | 810 lbf |
| Bolt Holes | 2 |
| Temperature Range [Min] | 32 °F |
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Split Steel Insert |
| Weight | 16.412 LB |
| EAN or UPC | 7316577339447 |
