Find a Service Center
- 5.6" Maximum Diameter
- 6 1/2" Stroke Length
- 4" Compressed Height
- 1/8" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
applications
- Palletizers
- Clutch and brake systems
- Textile looms
- Paper machines
- Commercial laundry machines
- Vibratory conveyors
- Electronic equipment
- Compressors
- Bin-tilting devices
- Conveyor systems
- Lift tables
- Roll tensioning
- Labeling equipment
| Force @ Maximum Stroke (80 psi) | 750 lbf |
| Lower End Plate Diameter | 5.1 in |
| Temperature Range [Max] | 150 °F |
| Force @ 3 in Stroke | 1150 lbf |
| Force @ 12 in Stroke | N/A |
| Upper End Plate Diameter | 5.1 in |
| Recommended Isolator Design Height [Max] | 9 in |
| Blind Tap for Mounting | 1/2-13 UNC x 0.63 Deep |
| Force @ 8 in Stroke | N/A |
| Force @ 2 in Stroke | 1150 lbf |
| Force @ 1 in Stroke | 1000 lbf |
| Force @ 6 in Stroke | N/A |
| Force @ 4 in Stroke | N/A |
| Temperature Range [Min] | -40 °F |
| Recommended Isolator Design Height [Min] | 7 in |
| Force @ Stroke (80 psi) | 990 lbf @ 1 in, 990 lbf @ 3 in, 990 lbf @ 5 in |
| End Closure | Style 1 End Retainer |
| Style No. | YI-1S |
| Pressure [Max] | 100 psi |
| Force @ 9 in Stroke | N/A |
| Bumpers | w/o Bumpers |
| Bellows Type | Shaped Sleeve |
| Compressed Height | 4 in |
| Stroke Length [Max] | 6 1/2 in |
| Air Inlet | 1/8 in |
| Air Inlet Type | NPT |
| Force @ 5 in Stroke | 1100 lbf |
| Weight | 2.6 LB |
