Find a Service Center
- Single Row Angular Contact Bearing, 90 mm ID x 160 mm OD x 30 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- Chemical
- Utilities
- General industrial
- Agricultural
| Static Load Rating [Max] | 21200 lbf |
| Inner Ring Width | 30 mm |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Contact Angle | 40° |
| icNumber | 7695858 |
| Origin | Single Row Angular Contact |
| Lubricant | Oil Preservative |
| Capacity | Standard Capacity |
| Radial Internal Clearance | C3 |
| Dynamic Load Rating | 27000 lbf |
| Enclosure | Open |
| Preload Level | None |
| Rows of Balls | Single |
| Cage Material | Brass/Bronze |
| Bore Type | Round Bore |
| Snap Ring | No Snap Ring |
| Cage Type | Metal |
| Seal Type | Unsealed |
| No. in Set | Single Bearing |
| Precision | Standard |
| Fillet Radius | 0.079 in |
| O.D. Type | Straight |
| Outer Ring Width | 30 mm |
| O.D. | 160 mm |
| Internal Design | Universal Mounting |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Seal Material | None |
| I.D. | 90 mm |
| Material | Steel |
| Bearing Type | Angular Contact |
| Ball Material | Steel |
| Weight | 5.806 LB |
| EAN or UPC | 87796068421 |
