Find a Service Center
- Single Row Angular Contact Bearing, 110 mm ID x 200 mm OD x 38 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Precision | Standard |
| Capacity | Standard Capacity |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Bearing Type | Angular Contact |
| Contact Angle | 40° |
| I.D. | 110 mm |
| Preload Level | None |
| O.D. Type | Straight |
| Inner Ring Width | 38 mm |
| Lubricant | Oil Preservative |
| No. in Set | Single Bearing |
| Dynamic Load Rating | 39000 lbf |
| Bore Type | Round Bore |
| Cage Type | Metal |
| Enclosure | Open |
| Ball Material | Steel |
| Inch/Metric | Metric Bore |
| O.D. | 200 mm |
| Radial Internal Clearance | C3 |
| Locking Device | No Locking Device |
| icNumber | 7695923 |
| Seal Material | None |
| Cage Material | Brass/Bronze |
| Seal Type | Unsealed |
| Origin | Single Row Angular Contact |
| Fillet Radius | 0.079 in |
| Static Load Rating [Max] | 32500 lbf |
| Snap Ring | No Snap Ring |
| Precision Level | Standard (ABEC 1) |
| Rows of Balls | Single |
| Material | Steel |
| Internal Design | Universal Mounting |
| Outer Ring Width | 38 mm |
| Weight | 11.38 LB |
| EAN or UPC | 87796074309 |
