Find a Service Center
- 1.5" Shaft, 3.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Hole Length | 3/4 in |
| Locking Device | Eccentric Locking Collar |
| Housing Material | Cast Iron |
| Base Width | 3 1/8 in |
| Temperature Range [Max] | 350 °F |
| Bearing Type | Ball Bearing |
| Base Length | 11 3/8 in |
| Bolt Size | 5/8 in |
| Bearing Insert | GN108KRRB |
| Series | LSAO Series |
| Seal Type | Labyrinth Seals |
| Housing Width | 4 1/2 in |
| Mounted Unit Duty | Heavy-Duty |
| End Type | Open End |
| Overall Width | 3 1/8 in |
| Pillow Block Type | Thru-Bolt |
| Shaft Dia. | 1.5 in |
| Bolt Hole Spacing | 9 in |
| Housing Height | 5 3/8 in |
| Collar O.D. | 2 1/2 in |
| Housing Construction | 1 Piece |
| Length Through Bore | 2.25 in |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Insert Type | Steel Insert |
| Bearing Design | Non-Expansion |
| Base Height | 1 1/16 in |
| Inch/Metric | Inch |
| Bolt Hole Width | 1 1/8 in |
| Weight | 13.242 LB |
| EAN or UPC | 87796059535 |
