Find a Service Center
- 1" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Spacing | 4 1/8 in |
| Bolt | 3/8 in |
| Seal Type | Contact Seals |
| Bolt Hole Width | 7/16 in |
| Inch/Metric | Inch |
| End Type | Open End |
| Static Load Rating [Max] | 1730 lbf |
| Locking Device | Eccentric Locking Collar |
| Temperature Range [Max] | 250 °F |
| Bearing Design | Non-Expansion |
| Housing Height | 2 11/16 in |
| Outer Ring Size | 205 |
| Length Through Bore | 1.375 in |
| Bolt Holes | 2 |
| Collar No. | S1100K |
| Series | RAK Series |
| Lubrication | Relubricatable |
| Base Height | 15/32 in |
| Base Width | 1 13/32 in |
| Collar O.D. | 1 1/2 in |
| Base Length | 5 1/2 in |
| Bolt Hole Length | 13/16 in |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Bearing Insert | G1100KRRB TDCF |
| Dynamic Load Rating | 3550 lbf |
| Overall Width | 1 49/64 in |
| Pillow Block Type | Thru-Bolt |
| Housing Material | Polymer |
| Shaft Dia. | 1 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Weight | 0.906 LB |
| EAN or UPC | 87796180055 |
-
![HACCP Friendly]()
HACCP Friendly
