Find a Service Center
- 2.6875" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Design | Non-Expansion |
| Length Through Bore | 3.5 in |
| Collar O.D. | 4 in |
| Insert Type | Steel Insert |
| Seal Type | Contact Seals |
| Inch/Metric | Inch |
| Lubrication | Relubricatable |
| Housing Width | 7 7/16 in |
| Bolt Holes | 2 |
| Bolt Hole Length | 1 in |
| Housing Construction | 1 Piece |
| Bolt Hole Spacing | 12 in |
| Bearing Type | Ball Bearing |
| Shaft Dia. | 2.6875 in |
| End Type | Open End |
| Locking Device | Eccentric Locking Collar |
| Collar No. | SO211K |
| Series | RSAO Series |
| Housing Height | 8 9/32 in |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Base Width | 4 3/8 in |
| Bearing Insert | GN211KRRB |
| Bolt Hole Width | 1 3/8 in |
| Overall Width | 4 3/8 in |
| Bolt Size | 7/8 in |
| Base Height | 1 3/4 in |
| Mounted Unit Duty | Heavy-Duty |
| Base Length | 15 3/8 in |
| Weight | 41.948 LB |
| EAN or UPC | 87796061828 |
