Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Collar No. | SN207K |
| Bearing Type | Ball Bearing |
| Bolt Holes | 2 |
| Base Length | 13 3/4 in |
| Bolt Hole Spacing | 11 1/4 in |
| Locking Device | Eccentric Locking Collar |
| Seal Type | Contact Seals |
| Housing Construction | 1 Piece |
| Base Height | 1 1/2 in |
| Inch/Metric | Inch |
| Base Width | 4 in |
| Shaft Dia. | 2.4375 in |
| Insert Type | Steel Insert |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Bearing Insert | GN207KRRB |
| End Type | Open End |
| Bolt Hole Width | 7/8 in |
| Bolt Hole Length | 1 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Housing Material | Cast Iron |
| Mounted Unit Duty | Heavy-Duty |
| Weight | 28.25 LB |
| EAN or UPC | 87796061682 |
