Find a Service Center
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Capacity | Standard Capacity |
| Static Load Rating [Max] | 1,120.00 lbf |
| Precision | Standard |
| Temperature Range [Min] | -30 °F |
| Snap Ring | No Snap Ring |
| Lubricant | Polyurea Base |
| Cage Type | Metal |
| Temperature Range [Max] | 275 °F |
| Fillet Radius | 0.031 in |
| Radial Internal Clearance | C3 |
| Preload Level | None |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 2,500.00 lbf |
| Inner Ring Width | 1/2 in |
| O.D. Type | Straight |
| Material | Steel |
| Rows of Balls | Single |
| Inch/Metric | Inch Bore |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Cage Material | Steel |
| Outer Ring Width | 1/2 in |
| Locking Device | No Locking Device |
| Seal Type | Non-Contact Seals |
| Ball Material | Steel |
| Enclosure | Double Shielded |
| O.D. | 2 in |
| Bore Type | Round Bore |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| I.D. | 1 in |
| Open Width | 3/8 in |
| icNumber | 7696984 |
| Closed Width | 1/2 in |
| Width | 1/2 in |
| Origin | Single Row Radial |
| Weight | 0.198 LB |
| EAN or UPC | 87796044821 |
| NSN Number | 3110-00-155-8894 |
