Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.21875" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Capacity | Standard Capacity |
| Pre Lubricant | None |
| Locking Device | No Locking Device |
| Preload Level | None |
| Closed Width | 9/32 in |
| Ball Material | Steel |
| Bore Type | Round Bore |
| Lubricant | Oil Preservative |
| Precision | Standard |
| Seal Material | None |
| Cage Type | Metal |
| Origin | Single Row Radial |
| Inner Ring Width | 7/32 in |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Fillet Radius | 0.016 in |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Static Load Rating [Max] | 260.00 lbf |
| Contact Angle | 0° |
| Radial Internal Clearance | C3 |
| Open Width | 7/32 in |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Unsealed |
| Inch/Metric | Inch Bore |
| icNumber | 7696811 |
| Enclosure | Open |
| I.D. | 1/4 in |
| Rows of Balls | Single |
| Material | Steel |
| O.D. Type | Straight |
| Cage Material | Steel |
| Dynamic Load Rating | 695.00 lbf |
| O.D. | 3/4 in |
| Width | 7/32 in |
| Outer Ring Width | 7/32 in |
| Weight | 0.022 LB |
| EAN or UPC | 87796044128 |
| NSN Number | 3110-00-293-8305 |
