Find a Service Center
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.196" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Snap Ring | No Snap Ring |
| Width | 0.196 in |
| Enclosure | Open |
| Capacity | Standard Capacity |
| Fillet Radius | 0.012 in |
| Precision | Standard |
| No. in Set | Single Bearing |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Lubricant | Oil Preservative |
| Inch/Metric | Inch Bore |
| O.D. Type | Straight |
| icNumber | 7696735 |
| Cage Material | Steel |
| O.D. | 5/8 in |
| Closed Width | 0.196 in |
| Contact Angle | 0° |
| Seal Type | Unsealed |
| Material | Steel |
| Static Load Rating [Max] | 125.00 lbf |
| Inner Ring Width | 0.196 in |
| Radial Internal Clearance | C3 |
| Open Width | 0.196 in |
| Precision Level | Standard (ABEC 1) |
| Cage Type | Metal |
| Dynamic Load Rating | 365.00 lbf |
| Pre Lubricant | None |
| Rows of Balls | Single |
| Ball Material | Steel |
| Locking Device | No Locking Device |
| I.D. | 1/4 in |
| Origin | Single Row Radial |
| Seal Material | None |
| Outer Ring Width | 0.196 in |
| Bearing Type | Radial |
| Bore Type | Round Bore |
| Preload Level | None |
| Weight | 0.16 LB |
| EAN or UPC | 87796044135 |
