Find a Service Center
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Closed Width | 9/32 in |
| Cage Type | Metal |
| Seal Type | Non-Contact Seals |
| Temperature Range [Max] | 275 °F |
| Dynamic Load Rating | 830.00 lbf |
| Capacity | Standard Capacity |
| No. in Set | Single Bearing |
| Inch/Metric | Inch Bore |
| Snap Ring | No Snap Ring |
| Radial Internal Clearance | C3 |
| Seal Material | Metal |
| Precision | Standard |
| Inner Ring Width | 9/32 in |
| Cage Material | Steel |
| Material | Steel |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Temperature Range [Min] | -30 °F |
| icNumber | 7695900 |
| I.D. | 3/8 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Ball Material | Steel |
| Bearing Type | Radial |
| Outer Ring Width | 9/32 in |
| Open Width | 7/32 in |
| Preload Level | None |
| O.D. | 7/8 in |
| Origin | Single Row Radial |
| Precision Level | Standard (ABEC 1) |
| Rows of Balls | Single |
| Width | 9/32 in |
| Enclosure | Double Shielded |
| Bore Type | Round Bore |
| Lubricant | Polyurea Base |
| Static Load Rating [Max] | 312.00 lbf |
| O.D. Type | Straight |
| Fillet Radius | 0.016 in |
| Weight | 0.17 LB |
| EAN or UPC | 87796044227 |
| NSN Number | 3110-00-175-1120 |
