Find a Service Center
- Single Row Radial Bearing, 0.5" ID x 1.125" OD x 0.25" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| icNumber | 7697515 |
| Cage Material | Steel |
| Preload Level | None |
| Inner Ring Width | 1/4 in |
| Snap Ring | No Snap Ring |
| O.D. | 1 1/8 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Width | 1/4 in |
| Static Load Rating [Max] | 500.00 lbf |
| Closed Width | 5/16 in |
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 1/4 in |
| O.D. Type | Straight |
| Seal Material | None |
| Origin | Single Row Radial |
| Cage Type | Metal |
| Bore Type | Round Bore |
| Rows of Balls | Single |
| Ball Material | Steel |
| Bearing Type | Radial |
| Locking Device | No Locking Device |
| Precision | Standard |
| Dynamic Load Rating | 1,270.00 lbf |
| Lubricant | Oil Preservative |
| Material | Steel |
| Pre Lubricant | None |
| Capacity | Standard Capacity |
| Radial Internal Clearance | C3 |
| I.D. | 1/2 in |
| Enclosure | Open |
| Contact Angle | 0° |
| Seal Type | Unsealed |
| Fillet Radius | 0.016 in |
| Open Width | 1/4 in |
| Weight | 0.02 KG |
| EAN or UPC | 87796044333 |
| NSN Number | 3110-00-554-0020 |
