Find a Service Center
- Single Row Radial Bearing, 0.875" ID x 1.875" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. | 1 7/8 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Enclosure | Open |
| Precision | Standard |
| Cage Material | Steel |
| Lubricant | Oil Preservative |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Snap Ring | No Snap Ring |
| Origin | Single Row Radial |
| Outer Ring Width | 3/8 in |
| Dynamic Load Rating | 2,500.00 lbf |
| Inner Ring Width | 3/8 in |
| Preload Level | None |
| Inch/Metric | Inch Bore |
| Open Width | 3/8 in |
| Rows of Balls | Single |
| Bearing Type | Radial |
| Capacity | Standard Capacity |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | None |
| Seal Type | Unsealed |
| Width | 3/8 in |
| Ball Material | Steel |
| Closed Width | 1/2 in |
| Radial Internal Clearance | C3 |
| I.D. | 7/8 in |
| Cage Type | Metal |
| Bore Type | Round Bore |
| Material | Steel |
| Contact Angle | 0° |
| Pre Lubricant | None |
| Fillet Radius | 0.031 in |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7697581 |
| Weight | 0.14 LB |
| EAN or UPC | 87796044791 |
| NSN Number | 3110-00-554-5715 |
