RC-061008-FS

Single Row Steel Needle Roller Bearing

Item #101681848

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Rolling Element	Roller
Outer Ring Width	0.5 in, 12.7 mm
Relubricatable	No
Overall Width	0.5 in, 12.7 mm
Bearing Material	1014 Steel
I.D.	3/8 in
Housing Bore [Max]	0.6255 in
Housing Shoulder Diameter	0.88 in
Bearing Design	Roller Clutch
O.D. Type	Straight
O.D.	0.625 in
Oil Hole	w/o Oil Hole
Cage Type	Window
Cage Material	Nylon
Housing Bore [Min]	0.6245 in
Radial Internal Clearance	N/A
Operating Temperature [Min]	-22 ˚F
Precision Class	ABEC 1
Shaft Dia. [Min]	0.3745 in
Clamp Torque	45.4 lbf
Tolerance	Iso Class 0 (RBEC 1)
Operating Temperature [Max]	230 ˚F
Component	Assembly
End Type	Open End
Bore Type	Round Bore, Inch Type
Capacity	Standard Capacity
Enclosure	Open
Precision Ground	Yes
Speed (Max) Oil	18000 rpm
No. of Rows	1
Self Aligning	No
Mounting Method	Press Fit
Shaft Dia. [Max]	0.375 in
Radial Internal Clearance Specification	N/A
Series	RC
Origin	Roller Clutches
Lubricant	Rust Preventative
Relubrication Feature	No
Weight	0.003 LB
EAN or UPC	605790205699