Find a Service Center
- 0.63 in Inner Diameter
- 0.88 in Outer Diameter
- 1 in Overall Width
description
- Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Precision Ground | Yes |
| Oil Hole | w/o Oil Hole |
| Tolerance | Iso Class 0 (RBEC 1) |
| Shaft Dia. [Max] | 0.625 in |
| No. of Rows | 3 |
| End Type | Open End |
| Bearing Design | Roller Clutch |
| I.D. | 5/8 in |
| Mounting Method | Press Fit |
| Housing Bore [Min] | 0.8745 in |
| Working Load | 914 lbf |
| Cage Material | Plastic |
| Component | Assembly |
| Static Load Rating | 8.14 kN |
| Bore Type | Round Bore, Inch Type |
| Precision Class | ABEC 1 |
| Housing Shoulder Diameter | 1.2 in |
| Outer Ring Width | 1 in, 25.4 mm |
| Relubricatable | No |
| Lubricant | Rust Preventative |
| Radial Internal Clearance Specification | N/A |
| Cage Type | Window |
| Self Aligning | No |
| Dynamic Load Rating | 8.05 kN |
| Enclosure | Open |
| Housing Bore [Max] | 0.8755 in |
| Speed (Max) Oil | 14000 rpm |
| Origin | Roller Clutches |
| Clamp Torque | 143 lbf |
| O.D. Type | Straight |
| Rolling Element | Roller |
| Operating Temperature [Min] | -22 ˚F |
| Relubrication Feature | No |
| Operating Temperature [Max] | 230 ˚F |
| Overall Width | 1 in, 25.4 mm |
| Capacity | Standard Capacity |
| Series | RCB |
| Bearing Material | 1014 Steel |
| O.D. | 0.875 in |
| Radial Internal Clearance | N/A |
| Shaft Dia. [Min] | 0.6245 in |
| Weight | 0.006 LB |
| EAN or UPC | 605790197116 |
