Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 40 Number of Teeth
- 2.526 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 40 |
| Hub Type | B |
| Bore Range [Min] | 0.312 in |
| Pitch Diameter | 2.546 in |
| Hub Dia. | 1 1/2 in |
| Belt Width | 0.25 in, 0.375 in |
| Finished Bore | N/A |
| Material | Steel |
| Set Screw Size | 10-24 x 3/16 |
| Bushing Type | None |
| Bore Type | Bushed |
| Bushing Series | N/A |
| Type | D-1 |
| Hub Projection | 0.218 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 1 in |
| Belt Pitch | 0.2 in |
| No. of Screws | 2 |
| Bore Range [Max] | 1.187 in |
| Belt Size | XL037 |
| Outside Dia. | 2.526 in |
| Weight | 0.35 LB |
| EAN or UPC | 697950117560 |
