Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 20 Number of Teeth
- 3.129 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Width Across Teeth | 1.063 in |
| Bushing Type | Taper-Lock |
| Length Through Bore | 1 in |
| Outside Dia. | 3.129 in |
| Type | KF-1 |
| Bore Range [Max] | 1.25 in |
| Bore Type | Bushed |
| Hub Projection | 0.312 in |
| Material | Steel |
| Belt Width | 3 in |
| Pitch Diameter | 3.183 in |
| No. of Teeth | 20 |
| Belt Pitch | 0.5 in |
| Bushing Series | 1210 |
| Hub Type | A |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Belt Size | H |
| Weight | 1.7 LB |
| EAN or UPC | 697950083230 |
