Find a Service Center
Alternate Products
- 180 mm ID x 320 mm OD x 52 mm Wide
- Open
- ABEC 1
- Brass / Bronze Cage
- Normal Clearance
applications
- Compressors
features
- Inner and outer ring raceway
- Suitable for simultaneously acting radial and axial loads
- Axial load capacity increases with increasing contact angle
compliances
- 0
| Precision | Standard |
| Seal Type | Unsealed |
| Locating | Retaining Slot |
| Width | 2.05 in, 52 mm |
| Cage Type | Metal |
| Bearing Design | Four-Point Contact Design |
| Material | Bearing Steel |
| Contact Angle | 35 Degree |
| Cage Material | Brass |
| Origin | Single Row Angular Contact |
| Ball Material | Steel |
| Radial Internal Clearance | Normal |
| Preload Level | Normal Axial Clearance |
| O.D. Type | Cylindrical |
| Snap Ring | No Snap Ring |
| Bore Type | Cylindrical |
| Series | QJ 200 |
| Outer Ring Width | 2.05 in, 52 mm |
| Precision Level | Standard (ABEC 1) |
| O.D. | 12.6 in, 320 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Bearing Type | Unmounted, Angular Contact |
| icNumber | 7696058 |
| Capacity | Standard Capacity |
| Rows of Balls | Single |
| I.D. | 7.09 in, 180 mm |
| Enclosure | Open |
| Inch/Metric | Metric |
| Inner Ring Width | 2.05 in, 52 mm |
| No. in Set | Single Bearing |
| Locking Device | No Locking Device |
| Lubricant | Oil Preservative |
| Flush Ground | No |
| Seal Material | None |
| Weight | 42.953 LB |
| EAN or UPC | 7316577314673 |
