Find a Service Center
Alternate Products
- Cam Follower
- 2" OD Flanged Roller
- 7/8" Standard Stud
- 7/8-14 Thread
- Metal Plug End
description
- SMITH-TRAX® were designed for applications with a combination of both radial and axial loads. The SMITH-TRAX® bearings use tapered roller bearings or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is considerably more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals provide for use in contaminated environments. A metal expansion plug closes off the back end of the bearing to allow for a large lubrication reservoir.
| Enclosure | Sealed |
| Threads per Inch | 14 |
| Thread Size | 7/8 |
| Roller Dia. | 2 in |
| Stud Dia. | 0.875 in |
| Roller Width | 1 11/16 in |
| Static Capacity | 2000 lbf |
| Inch/Metric | Inch |
| Dynamic Load Rating | 3490 lbf |
| Material | Steel |
| Stud Length | 2 in |
| Stud Type | Standard |
| End Type | Metal Plug |
| Thread Type | UNF |
| Roller Type | Flanged |
| Bearing Type | Ball Bearing |
| Flange Thickness | 0.59375 in |
| Dynamic Thrust Load Rating | 1830 lbf |
| Weight | 1.8 LB |
| EAN or UPC | 651041149236 |
