- Single Row Angular Contact Bearing, 75 mm ID x 130 mm OD x 25 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| O.D. Type | Cylindrical |
| Limiting Speed - Grease | 4300 rpm |
| Cage Type | Metal |
| Static Load Rating [Max] | 15600 lbf |
| Outer Ring Width | 0.98 in, 25 mm |
| Precision | Standard |
| Seal Material | None |
| Series | 7200PJ |
| I.D. | 2.95 in, 75 mm |
| Inch/Metric | Metric |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | Normal |
| Inner Ring Width | 0.98 in, 25 mm |
| Width | 0.98 in, 25 mm |
| Snap Ring | No Snap Ring |
| Cage Material | Bearing Steel |
| Seal Type | Unsealed |
| Capacity | Standard Capacity |
| Fillet Radius | 1.5 mm |
| Internal Design | Universal Mounting |
| Locking Device | No Locking Device |
| Ball Material | Steel |
| Material | Bearing Steel |
| Lubricant | Oil Preservative |
| Rows of Balls | Single |
| Bearing Type | Unmounted, Angular Contact |
| Origin | Single Row Angular Contact |
| Enclosure | Open |
| Flush Ground | Yes |
| icNumber | 7695987 |
| Contact Angle | 40 Degree |
| Static Load Rating | 64 kN |
| No. in Set | Single Bearing |
| Temperature Range [Max] | 450 °F |
| Preload Level | Light |
| Limiting Speed - Oil | 5600 rpm |
| Bore Type | Cylindrical |
| Dynamic Load Rating | 72.8 kN |
| O.D. | 5.12 in, 130 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Weight | 2.866 LB |
| EAN or UPC | 97741016773 |

