- Single Row Angular Contact Bearing, 80 mm ID x 140 mm OD x 26 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| Radial Internal Clearance Specification | Normal Clearance |
| I.D. | 3.15 in, 80 mm |
| Bore Type | Cylindrical |
| Enclosure | Open |
| Cage Type | Metal |
| Series | 7200PJ |
| Precision | Standard |
| Contact Angle | 40 Degree |
| Capacity | Standard Capacity |
| Origin | Single Row Angular Contact |
| Static Load Rating [Max] | 18700 lbf |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | Normal |
| Flush Ground | Yes |
| Outer Ring Width | 1.02 in, 26 mm |
| Snap Ring | No Snap Ring |
| Bearing Type | Unmounted, Angular Contact |
| Width | 1.02 in, 26 mm |
| Preload Level | Light |
| Cage Material | Brass |
| Rows of Balls | Single |
| Inch/Metric | Metric |
| Fillet Radius | 2 mm |
| Seal Type | Unsealed |
| Inner Ring Width | 1.02 in, 26 mm |
| No. in Set | Single Bearing |
| Dynamic Load Rating | 83.2 kN |
| Ball Material | Steel |
| O.D. Type | Cylindrical |
| Seal Material | None |
| icNumber | 7695857 |
| Limiting Speed - Grease | 3800 rpm |
| Material | Bearing Steel |
| Lubricant | Oil Preservative |
| Temperature Range [Max] | 450 °F |
| Internal Design | Universal Mounting |
| Static Load Rating | 73.5 kN |
| O.D. | 5.51 in, 140 mm |
| Locking Device | No Locking Device |
| Limiting Speed - Oil | 4900 rpm |
| Weight | 3.492 LB |
| EAN or UPC | 97741016827 |

