- Single Row Angular Contact Bearing, 25 mm ID x 62 mm OD x 17 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| Locking Device | No Locking Device |
| Width | 0.67 in, 17 mm |
| Internal Design | Universal Mounting |
| I.D. | 0.98 in, 25 mm |
| Precision Level | Standard (ABEC 1) |
| Lubricant | Oil Preservative |
| Precision | Standard |
| Seal Material | None |
| Radial Internal Clearance Specification | Normal Clearance |
| Cage Type | Metal |
| Outer Ring Width | 0.67 in, 17 mm |
| Static Load Rating | 15.6 kN |
| Contact Angle | 40 Degree |
| O.D. | 2.44 in, 62 mm |
| Capacity | Standard Capacity |
| O.D. Type | Cylindrical |
| Static Load Rating [Max] | 3080 lbf |
| Radial Internal Clearance | Normal |
| Seal Type | Unsealed |
| Origin | Single Row Angular Contact |
| Flush Ground | Yes |
| Series | 7300PJ |
| Bearing Type | Unmounted, Angular Contact |
| Limiting Speed - Oil | 14000 rpm |
| icNumber | 7695885 |
| Inner Ring Width | 0.67 in, 17 mm |
| Cage Material | Brass |
| Preload Level | Light |
| Ball Material | Steel |
| Temperature Range [Max] | 450 °F |
| Inch/Metric | Metric |
| Dynamic Load Rating | 26 kN |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Fillet Radius | 1 mm |
| Material | Bearing Steel |
| Limiting Speed - Grease | 11000 rpm |
| Enclosure | Open |
| Bore Type | Cylindrical |
| Snap Ring | No Snap Ring |
| Weight | 0.529 LB |
| EAN or UPC | 97741017312 |

