Skip to content Skip to navigation menu
7300-PJD Medium Series Duplex Ball Bearing

7310PJDU

7300-PJD Medium Series Duplex Ball Bearing
Item #102137945
  • Single Row Angular Contact Bearing, 50 mm ID x 110 mm OD x 27 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
7300-PJD Medium Series Duplex Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Single Row Angular Contact Bearing, 50 mm ID x 110 mm OD x 27 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle

features

  • MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
  • 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
  • 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
  • ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
  • 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Bore Type Cylindrical
Material Bearing Steel
Flush Ground Yes
Outer Ring Width 1.06 in, 27 mm
Static Load Rating [Max] 11900 lbf
Limiting Speed - Oil 7500 rpm
Dynamic Load Rating 74.1 kN
Seal Material None
Contact Angle 40 Degree
Radial Internal Clearance Normal
Precision Level Standard (ABEC 1)
Width 1.06 in, 27 mm
Internal Design Universal Mounting
Cage Type Metal
Origin Single Row Angular Contact
Seal Type Unsealed
Snap Ring No Snap Ring
Fillet Radius 2 mm
Series 7300PJ
icNumber 7695806
I.D. 1.97 in, 50 mm
Lubricant Oil Preservative
No. in Set Single Bearing
Limiting Speed - Grease 5800 rpm
Radial Internal Clearance Specification Normal Clearance
O.D. 4.33 in, 110 mm
O.D. Type Cylindrical
Bearing Type Unmounted, Angular Contact
Temperature Range [Max] 450 °F
Inch/Metric Metric
Enclosure Open
Rows of Balls Single
Ball Material Steel
Capacity Standard Capacity
Cage Material Brass
Static Load Rating 51 kN
Locking Device No Locking Device
Precision Standard
Preload Level Light
Inner Ring Width 1.06 in, 27 mm
Weight 2.67 LB
EAN or UPC 97741017602
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison