- Single Row Angular Contact Bearing, 60 mm ID x 130 mm OD x 31 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
features
- MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
- 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
- 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
- ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
- 7300-PJ and PJD Series bearings are used for very heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| I.D. | 2.36 in, 60 mm |
| Cage Material | Brass |
| Seal Material | None |
| Outer Ring Width | 1.22 in, 31 mm |
| Static Load Rating | 69.5 kN |
| icNumber | 7695810 |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Unsealed |
| Preload Level | Light |
| Limiting Speed - Oil | 6400 rpm |
| O.D. | 5.12 in, 130 mm |
| Cage Type | Metal |
| Temperature Range [Max] | 450 °F |
| Inner Ring Width | 1.22 in, 31 mm |
| Enclosure | Open |
| Contact Angle | 40 Degree |
| Bore Type | Cylindrical |
| Static Load Rating [Max] | 16200 lbf |
| Lubricant | Oil Preservative |
| Dynamic Load Rating | 95.6 kN |
| Flush Ground | Yes |
| Fillet Radius | 2 mm |
| O.D. Type | Cylindrical |
| Bearing Type | Unmounted, Angular Contact |
| Internal Design | Universal Mounting |
| Limiting Speed - Grease | 4900 rpm |
| Precision | Standard |
| Width | 1.22 in, 31 mm |
| Inch/Metric | Metric |
| Capacity | Standard Capacity |
| Series | 7300PJ |
| Rows of Balls | Single |
| Radial Internal Clearance | Normal |
| Ball Material | Steel |
| Locking Device | No Locking Device |
| Snap Ring | No Snap Ring |
| Origin | Single Row Angular Contact |
| Material | Bearing Steel |
| Weight | 4.09 LB |
| EAN or UPC | 97741017718 |

